20220326141712

4-Chloro-4’-Hydroxy Benzophenone (CBP)

Hello, come to consult our products !

4-Chloro-4’-Hydroxy Benzophenone (CBP)

Commodity:4-Chloro-4’-Hydroxy Benzophenone (CBP)

CAS#: 42019-78-3

Molecular Formula: C13H9O2Cl

Structural Formula:

CBP

Uses: the intermediate of fenofibrate.


Product Detail

Product Tags

Specification:
Appearance: Orange to brick red crystal powder
Loss on drying: ≤0.50%
Residue on ignition: ≤0.5%
Single impurity: ≤0.5%
Total impurities: ≤1.5%
Purity: ≥99.0%
Packing: 250kg/bag and 25kg/fiber drum

Physicochemical properties:
Density: 1.307 g / cm3
Melting point: 177-181 ° C
Flash point: 100 ° C
Refractive index: 1.623
Storage condition: store in a tightly closed container Store in a cool, dry, well-ventilated area away from incompatible substances.
Stable: Stable under normal temperatures and pressures

Specific application
It is generally used in organic synthesis and is an intermediate of the anti infertility drug radiomiphene

Production method:
1. P-chlorobenzoyl chloride was prepared by the reaction of p-chlorobenzoyl chloride with anisole, followed by hydrolysis and demethylation.
2. Reaction of p-chlorobenzoyl chloride with phenol: dissolve 9.4g (0.1mol) of phenol in 4ml of 10% sodium hydroxide solution, add 14ml (0.110mol) of p-chlorobenzoyl chloride dropwise at 40 ~ 45 ℃, add it within 30min, and react at the same temperature for 1H. Cool to room temperature, filter and dry to obtain 22.3g of phenyl p-Chlorobenzoate. The yield is 96%, and the melting point is 99 ~ 101 ℃.

Production method:

1. P-chlorobenzoyl chloride was prepared by the reaction of p-chlorobenzoyl chloride with anisole, followed by hydrolysis and demethylation.
2. Reaction of p-chlorobenzoyl chloride with phenol: dissolve 9.4g (0.1mol) of phenol in 4ml of 10% sodium hydroxide solution, add 14ml (0.110mol) of p-chlorobenzoyl chloride dropwise at 40 ~ 45 , add it within 30min, and react at the same temperature for 1H. Cool to room temperature, filter and dry to obtain 22.3g of phenyl p-Chlorobenzoate. The yield is 96%, and the melting point is 99 ~ 101 .

Health hazard:
cause skin irritation. Cause serious eye irritation. May cause respiratory tract irritation.

Precautions:
Clean thoroughly after operation.
Wear protective gloves / protective clothing / protective goggles / protective masks.
Avoid inhalation of dust / smoke / gas / smoke / vapour / spray.
Use only outdoors or with good ventilation.

Accident response:
In case of skin contamination: wash thoroughly with water.
In case of skin irritation: seek medical attention.
Take off the contaminated clothes and wash them before reuse
If in eyes: Rinse carefully with water for a few minutes. If you wear contact lenses and can easily take them out, take them out. Continue flushing.
If you still feel eye irritation: see a doctor / doctor.
In case of accidental inhalation: transfer the person to a place with fresh air and maintain a comfortable breathing position.
If you feel unwell, call the detoxification center / doctor

 

Safe storage:
Store in a well ventilated place. Keep the container closed.
The storage area must be locked.

Waste disposal:
Dispose of contents / containers in accordance with local regulations.

First aid measures:
Inhalation: if inhaled, move the patient to fresh air.
Skin contact: take off contaminated clothes and wash skin thoroughly with soapy water and clear water. If you feel unwell, see a doctor.
Eye contact: separate eyelids and rinse with flowing water or normal saline. Seek medical attention immediately.
Ingestion: gargle and do not induce vomiting. Seek medical attention immediately.
Advice to protect the rescuer: transfer the patient to a safe place. Consult a doctor. Show this chemical safety technical manual to the doctor on site.


  • Previous:
  • Next:

  • Write your message here and send it to us